Rohde & Schwarz R&S UPP, User Manual

Page: 705 / 938

Remote Control - Command Description
R&S
®
UPP
689 User Manual 1411.1055.32 ─ 10
7.3.2 Configuring the Generators
The generator settings are performed in the
OUTPut
and
SOURce
sub systems.
7.3.2.1 Reference Level and Frequency
Common generator commands concern the setting of the reference level and fre-
quency. These settings are performed in the
SOURce
subsystem.
●
SOURce:FREQuency:REFerence
on page 689
●
SOURce:VOLTage:REFerence
on page 689
SOURce:FREQuency:REFerence <reference>
Parameters:
<reference> float
Manual operation: See "Ref Frequency" on page 199
See "Ref Frequency" on page 210
See "Ref Frequency" on page 218
See "Ref Frequency" on page 229
SOURce:VOLTage:REFerence <reference>
Parameters:
<reference> float
Manual operation: See "Ref Voltage" on page 199
See "Ref Voltage" on page 210
See "Ref Voltage" on page 217
See "Ref Voltage" on page 229
7.3.2.2 Configuring the Analog Generator
●
OUTPut:BANDwidth:MODE
on page 689
●
OUTPut:CHANnel
on page 690
●
OUTPut:IMPedance
on page 690
●
OUTPut:IMPedance:UNBalanced?
on page 690
●
OUTPut:TYPE
on page 690
●
SOURce:VOLTage:MAXimum
on page 690
●
SOURce:VOLTage:RANGe
on page 690
OUTPut:BANDwidth:MODE <mode>
Parameters:
<mode> B22 | B40 | B80 | AUTO
Manual operation: See "Bandwidth" on page 198
Generator Settings