Rohde & Schwarz R&S UPP, User Manual

Page: 249 / 938

Instrument Functions
R&S
®
UPP
233 User Manual 1411.1055.32 ─ 10
The panels for the analog and digital generator are almost identical; the settings are
therefore described together. Any differences are indicated.
With an activated multichannel generator (requires optionR&S UPP
‑
B8, multichannel
audio generator), individual signals can be configured for all selected channels using
the "Universal" generator function (see
Chapter 5.6.13, "Universal" , on page 268). All
other generator functions cause perfectly identical signals on all selected channels.
5.6.1 Sine
The generator generates a sine-wave signal. Frequency and level are the same for
both channels.
Function
Selects the sine signal.
Remote command:
SOURce:FUNCtion
on page 697
SINE
Dither
In the digital generator, a noise component with adjustable amplitude can be superim-
posed on the signal. The checkbox enables or disables this function.
The parameter fields for Dither do not appear in the analog generator.
Remote command:
SOURce:SINusoid:DITHer:STATe
on page 698
SOURce:SINusoid:DITHer
on page 698
Sweep Ctrl
Used to activate the sweep system. The frequency or level of the signal can be varied
within a selectable range from the start value to the stop value. If frequency or level is
selected as the x-axis, the measured values can be displayed as a curve in the Sweep
Graph graphical window.
Generator Signals