Rohde & Schwarz R&S UPP, User Manual

Page: 532 / 938

Instrument Functions
R&S
®
UPP
516 User Manual 1411.1055.32 ─ 10
"Group Delay" The Group Delay measurement result of the additional measurement
function.
Freq/Phase = Freq & Grp Del
If you are using a multichannel instrument, set the channel reference
by means of the following "Channel" parameter field.
is displayed as Trace A or Trace B over a basic physical quantity
selected under x-axis.
The measurement result is displayed in the numeric display:
"File: Trace A" Trace A is loaded from a file. The file name is entered in the subse-
quent parameter field.
"File: Trace B" Trace B is loaded from a file. The file name is entered in the subse-
quent parameter field.
Remote command:
DISPlay:SWEep<n2>:A:YSOurce
on page 798
DISPlay:SWEep<n2>:B:YSOurce
on page 798
Y-Source
FFT Graph graphic system
Used to select which measurement results obtained with the FFT or Post FFT analyzer
measurement function are displayed graphically as TRACE A or as TRACE B.
Section of the Analyzer Function panel:
For more information on Y Source (see Chapter 5.51, "Measured value Sequences" ,
on page 601).
"Off" No trace is displayed or an available trace is deleted.
"FFT Level Chx, FFT Level"
The level characteristic versus the frequency of
●
channel 1 or
●
channel 2 or
●
the channel number specified under the following "Channel"
parameter field in the case of a multichannel instrument
of the FFT or Post FFT analyzer measurement function is displayed
as Trace A or Trace B over a frequency x-axis.
Curve, Spectrum and Bar Graph Display