Rohde & Schwarz R&S UPP, User Manual

Page: 221 / 938

Instrument Functions
R&S
®
UPP
205 User Manual 1411.1055.32 ─ 10
5.3 Configuring the Digital Generator
5.3.1 Digital Generator Configuration Panel
The "Digital Audio" generator instrument requires the options
●
R&S UPP-B2 (digital audio interfaces) for 2-channel generation or
●
R&S UPP-B4 (HDMI and digital audio interfaces) for 2-channel generation or
●
R&S UPP-B8 (multichannel audio generator) for 8-channel generation
The configuration options of the digital audio generator are described below.
Channel
Selection of the left and right digital audio channels.
"OFF" Both channels are deactivated.
The frequency and level setting of the channels have no effect.
A "blank frame" is generated that does not contain any audio data.
"1" The left channel supplies the generator signal, the right channel is
deactivated.
"2" The right channel supplies the generator signal, the left channel is
deactivated.
"2 = 1" Both channels, left and right, return the same output signal.
If the generator function "Stereo Sine" is selected, both channels may
differ with regard to frequency, phase and amplitude.
Configuring the Digital Generator