Rohde & Schwarz R&S UPP, User Manual

Page: 503 / 938

Instrument Functions
R&S
®
UPP
487 User Manual 1411.1055.32 ─ 10
"DC" Starting with serial numbers 120100, 140100, 180100, the supply of
external instruments of the R&S UPP can be handled by outputting
two DC voltages in the range from -5
V to +5 V which can be set
independent of each other. In this case, the two monitor outputs can
each output up to 50 mA.
Remote command:
AUXiliaries:SPEaker:SOURce<n3>
on page 778
Monitor 1, Monitor 2
Used to select the monitored channel
The fields "Monitor 1" and "Monitor 2" are used to select which BNC socket is assigned
to which measurement channel.
Remote command:
AUXiliaries:SPEaker:MONitor<n3>
on page 778
Voltage 1, Voltage 2
DC voltage output for the supply of devices under test or external circuits.
Starting with serial numbers 120100, 140100, 180100, you can select in the fields
"Voltage 1" and "Voltage 2" which DC level is output at which BNC socket at the rear of
the instrument. To supply devices under test or external circuits, the R&S UPP can out-
put two DC voltages in the range from -5
V to +5 V which can be set independent of
each other. In this case, the two monitor outputs can each output up to 50 mA.
These parameter fields are always provided for two channels depending on the "Signal
Source" Track / Split setting.
Remote command:
AUXiliaries:VOLTage<n2>
on page 779
Volume, Volume 1, Volume 2
Used to set the level for monitoring
Depending on the "Signal Source" Track / Split setting, the parameter field for both
monitor outputs is provided together for Monitor 1 and Monitor 2 for "Track" and sepa-
rately for "Split" so that different levels can be set for Monitor 1 and Monitor 2.
Auxiliaries Panel