Rohde & Schwarz R&S UPP, User Manual

Page: 715 / 938

Remote Control - Command Description
R&S
®
UPP
699 User Manual 1411.1055.32 ─ 10
SOURce:VOLTage<n2> <voltage>
Suffix:
<n2>
.
For Multisine generator signals, the suffix selects one of the sin-
ewave 1 to 32 .
For Modulation, suffix 1 or no suffix selects the modulation devi-
ation or depth and suffix 2 the carrier voltage.
For all other generator signals, the suffix is irrelevant and must
be omitted or set to 1.
Parameters:
<voltage> float
Manual operation: See "Voltage" on page 234
See "Volt Ch1" on page 237
See "Volt No i" on page 241
See "Voltage" on page 243
See "Volt Peak Ch1" on page 261
See "Total RMS" on page 263
See "Voltage" on page 278
SOURce:VOLTage:EQUalize <equalize>
Parameters:
<equalize> ON | OFF
Manual operation: See "Equalizer / Equalizer Ch1" on page 238
See "Equalizer" on page 244
See "Equalizer" on page 249
See "Equalizer" on page 254
See "Equalizer" on page 272
See "Equalizer" on page 279
SOURce:VOLTage:OFFSet<n3> <offset>
Suffix:
<n3>
.
1|2
The suffix is only relevant for generator function "Stereo Sine". It
selects the channel 1 or 2 for which the offset is entered. The
suffix is irrelevant for all other generator functions and can be
omitted.
Parameters:
<offset> float
Generator Settings