Rohde & Schwarz R&S UPP, User Manual

Page: 636 / 938

Instrument Functions
R&S
®
UPP
620 User Manual 1411.1055.32 ─ 10
Black: Explanation of fields. These explanations are not stored in the sweep list.
Green: Fixed entries in ASCII format.
Red: Entries which change depending on the settings in the corresponding DispConfig
panel.
Table 5-12: Explanation of terms:
Identifier Identifies the file as a limit file. During loading this identification is used to
decide whether the file concerned can be loaded.
Number of following X/Y
pairs Self-explanatory
Offset ON/OFF A comment which states whether, during the generation of a limit file from a
measured value sequence, an offset value was added (ON) or not (OFF) to the
Y data.
Offset value A comment which states which offset value was added to the Y data during the
generation of a limit file from a measured value sequence.
X and Y unit Depending on the selected x
‑
axis and the measurement function, a wide variety
of units can be entered here for the X / Y values. Examples for the X values:
Hz, °, s, V, FS or UI. Examples for the Y values: V, dBV, dBr, … V/Vr, °, s, db, %
etc.
X/Y pairs X/Y pairs in the specified units.
Example of a limit data set:
UPV LIMIT FILE
9 # Datacount
# Offset ON
# Offset value = 10.0 dBV
Hz dBV
100 -70
711 -70
789 -45
875 -10
970 -10
1076 -10
1193 -30
1323 -70
2000 -70
Format