Rohde & Schwarz R&S UPP, User Manual

Page: 839 / 938

Remote Control - Command Description
R&S
®
UPP
823 User Manual 1411.1055.32 ─ 10
Parameters:
<ypos> float
Sets O cursor | X Cursor to the defined value, if a horizontal cur-
sor is involved.
The unit in which the value is entered depends on the unit of the
Y-axis.
Example: DISPlay:WAVeform:XCURsor:SETTo:YPOS -110 DBV
DISPlay:FFT<n2>:OCURsor:STATe <state>
DISPlay:FFT<n2>:XCURsor:STATe <state>
DISPlay:WAVeform<n2>:OCURsor:STATe <state>
DISPlay:WAVeform<n2>:XCURsor:STATe <state>
DISPlay:BARGraph<n2>:OCURsor:STATe <state>
DISPlay:BARGraph<n2>:XCURsor:STATe <state>
DISPlay:SWEep<n2>:OCURsor:STATe <state>
DISPlay:SWEep<n2>:XCURsor:STATe <state>
Corresponds to softkey operation:
Cursor
O cursor | X cursor,
O active | X active
Parameters:
<state> OFF | ACTive | INACtive
OFF
O cursor | X cursor off
ACTive
O cursor | X cursor is visible as a solid line and is controlled via
[TAB] and [Shift+TAB].
INACtive
O cursor | X cursor is visible as a dotted line and can not be con-
trolled.
Example: DISPlay:BARGraph:OCURsor:STATe OFF
DISPlay:BARGraph2:XCURsor:STATe ACTive
DISPlay:FFT<n2>:OCURsor:Y?
DISPlay:FFT<n2>:XCURsor:Y?
DISPlay:WAVeform<n2>:OCURsor:Y?
DISPlay:WAVeform<n2>:XCURsor:Y?
DISPlay:BARGraph<n2>:OCURsor:Y?
DISPlay:BARGraph<n2>:XCURsor:Y?
DISPlay:SWEep<n2>:OCURsor:Y?
DISPlay:SWEep<n2>:XCURsor:Y?
No corresponding function in the softkey menu.
Softkey Commands of the Graphical Display