Rohde & Schwarz R&S UPP, User Manual

Page: 152 / 938

Manual Operation
R&S
®
UPP
136 User Manual 1411.1055.32 ─ 10
Function Computer keyboard Mouse
Open parameter list Press the Enter key. Click button.
Scroll Move the displayed section of the
list using the up/down cursor
keys. Activate the UP or DOWN button
in the scrollbar until the desired
entry is displayed.
Select parameter Highlight the selection using the
up/down cursor keys and press
the Enter key. Click parameter.
Exit the parameter list without
adopting a setting Press the ESC key. Click anywhere outside parameter
list.
4.7.9 Numeric Entries – Numeric Entry Fields
Numeric values (e.g. the output voltage) can be entered or edited in these fields.
This can be done is various ways. However, the following applies irrespective of the
chosen method:
Entries outside the possible value range are not accepted; an audible warning is
issued and the entry is changed to its permissible minimum or maximum value. The
possible value range is displayed above the softkey bar.
4.7.9.1 Value Inputs in Edit mode – Green Selection Frame
When the focus is moved to a numeric entry field, the system enters Edit mode, which
is indicated by a green selection frame. In addition, the current numeric value is high-
lighted with a blue background.
If the value must be completely re-entered, simply start entering numbers using the
external computer keyboard; the first keystroke automatically deletes the old value.
The digit to the left of the cursor can be deleted at any time during entry using the [<--]
key.
If only certain digits are to be changed, position the cursor accordingly using the cursor
keys or digit cursor and enter the new digits (if the position of the digit cursor is
changed before the first digit is entered, the old value will not be deleted). The [Add] or
[Insert] key can be used to switch between insert and overwrite mode.
The numeric entry field is closed with:
●
ENTER
The newly entered value is adopted.
●
ESC
The old value is retained.
●
Softkeys
The selected unit is set and adopted together with the newly entered value.
●
"m" or "k" on the external keyboard
Settings in the Panels