Rohde & Schwarz R&S UPP, User Manual

Page: 560 / 938

Instrument Functions
R&S
®
UPP
544 User Manual 1411.1055.32 ─ 10
"Replace" Replace.
The scan (selected using [Next Scan] or by means of the scan num-
ber in the graphical display) is replaced by the scan from a
measure-
ment or from the trace file specified in the "Import from" parameter
field below.
"Append" The scans from a measurement or from the trace file specified in the
"Import from" parameter field below are appended to the current
trace.
Import from
This parameter field appears only for graphic systems that allow multiscans ("Scan" =
"Multi"), and is therefore available to the following graphic system:
Available in the graphics subsystems
Sweep
It is used to enter the name of a trace file whose scans are to replace a current scan or
are to be appended to the current trace.
Whether scans are to be replaced or appended is determined in the "New scan "
parameter field above:
Replace: "New scan" = "Replace"
Append: "New scan" = "Append"
See Chapter 5.51, "Measured value Sequences" , on page 601).
X-Source
Determines the response of the following x axis parameter field.
Available in the graphics subsystems
Sweep
Curve, Spectrum and Bar Graph Display