Rohde & Schwarz R&S UPP, User Manual

Page: 239 / 938

Instrument Functions
R&S
®
UPP
223 User Manual 1411.1055.32 ─ 10
Source
Selection of the video source. In the HDMI generator, the video data and test patterns
can be generated either internally or supplied via the AUX IN socket, combined with
the audio signals and output at the SOURCE socket. In this mode, all info frames are
also copied to the SOURCE socket, with the exception of the internally generated
audio info frames.
"Intern" The video data are internally generated. The test signal is selected
via the "Pattern" parameter field.
The "Internal" selection in conjunction with "Pattern" = "Lip Sync"
automatically provides the "Lip Sync" generator function. The trigger
pattern used for this measuring function must be generated internally.
"Aux In" The AUX IN socket can be used to supply externally generated video
data, combined with the internally generated audio signals and output
via the SOURCE socket.
Remote command:
SOURce:HDMI:VIDeo:SOURce
on page 696
Format Resol
This selection describes the horizontal and vertical resolution as well as the aspect
ratio of the created video format according to the CEA-861 standard.
Depending on the selected resolution, one or several VSYNC frequencies can be
selected in the following parameter field The resulting video identification code accord-
ing to CEA-861 is shown in the "Format No" field.
Remote command:
SOURce:HDMI:VIDeo:RESolution
on page 696
Format Freq
Selection of the vertical video frequency. Corresponds to the VSYNC frequency. The
values available for selection are oriented to the previously selected resolution accord-
ing to CEA-861.
Configure HDMI Generator