Rohde & Schwarz R&S UPP, User Manual

Page: 482 / 938

Instrument Functions
R&S
®
UPP
466 User Manual 1411.1055.32 ─ 10
5.38.5 Examples of Settling
The examples below are based on the following settings:
With the above settings, the current measured value may deviate:
●
from the last measured value by a max. of +/- 1% (or +/- 0.086 dB),
●
from the 2nd-last measured value by a max. of +/- 2 % (or +/- 0.172 dB),
●
from the 3rd-last measured value by a max. of +/- 4 % (or +/- 0.340 dB),
●
from the 4th-last measured value by a max. of +/- 8 % (or +/- 0.668 dB),
●
from the 5th-last measured value by a max. of +/- 16% (or +/- 1.289 dB)
For an analog level measurement with a result of 1 V this means that
●
the last measured value must be between 0.99 and 1.01 V.
●
the 2nd last measured value must be between 0.98 and 1.02 V.
●
the 3rd last measured value must be between 0.96 and 1.04 V.
●
the 4th last measured value must be between 0.92 and 1.08 V.
●
the 5th last measured value must be between 0.84 and 1.16 V
For a distortion measurement with a result of 0.01% this means that
●
the last measured value must be between 0.0099 and 0.0101%
●
the 2nd-last measured value must be between 0.0098 and 0.0102%
●
the 3rd-last measured value must be between 0.0096 and 0.0104%
●
the 4th-last measured value must be between 0.0092 and 0.0108%
●
the 5th-last measured value must be between 0.0084 and 0.0116%
in settled state.
5.39 Filter
This section describes the setting options for the filter, see Chapter 5.40, "User-Defina-
ble Filters" , on page 469, and Chapter 5.41, "Weighting Filters" , on page 478.
The user-definable filters are configured in the Filter panel. They can then be used in
the analyzer as prefilters and function filters and also in the generator.
The weighting filters and the fixed highpass and lowpass filters are not selected in the
Filter panel. They are selected together with the user-configurable filters in the selec-
tion fields of the analyzer and generator.
Filter