Rohde & Schwarz R&S UPP, User Manual

Page: 612 / 938

Instrument Functions
R&S
®
UPP
596 User Manual 1411.1055.32 ─ 10
SENSe3:FREQuency:LIMUpper:VALue
on page 806
SENSe3 = Frequency, phase or group delay measurement
SENSe3:PHASe:LIMUpper
on page 810
SENSe3:PHASe:LIMUpper:VALue
on page 810
SENSe3 = Frequency, phase or group delay measurement
Show Min Max
Used to activate/deactivate the Min/Max display.
Two numeric values and the ends of the blue bar inside the green bar indicate the low-
est and highest values measured.
"activated" The lowest and highest value measured since [START] are displayed.
The Min/Max values are shown in the top left and right corners of the
combo display.
The ends of the blue Min/Max bar indicate the lowest and highest val-
ues measured since [START].
[START] resets min/max value recording and the collection of mea-
sured values begins again.
"deactivated" The Min/Max display is deactivated.
5.49.4 Softkey Menu
Two-channel instruments:
Every combo display has its own softkey menu. The settings selected in the menu
apply exclusively to the associated combo display and affect no other combo display.
Multichannel instruments:
If a softkey menu from a combo display of a specific measurement function (e.g. Level
Monitor) was used, the chosen setting affects
all open combo displays for this mea-
surement function. In the case of multichannel instruments, there are no customized
settings for individual channels.
The settings for "Store Reference", "Show Min/Max", "Show Lim Low" and "Show Lim
Upp" can therefore be immediately displayed 1 to 1 in the associated measurement
result configuration panel.
Combi Display