Rohde & Schwarz R&S UPP, User Manual

Page: 538 / 938

Instrument Functions
R&S
®
UPP
522 User Manual 1411.1055.32 ─ 10
"activated" The contents of the parameter fields for "TRACE A" are transferred to
"TRACE B". The parameter fields for "TRACE B" then appear grayed
out and cannot be accessed.
Setting
changes in "TRACE A" are immediately applied to
"TRACE B".
Example:
"deactivated" The parameter fields for "TRACE A " and "TRACE B " can be
accessed and changed separately.
Example:
Remote command:
DISPlay:SWEep<n2>:TRACk:LIMit
on page 800
DISPlay:SWEep<n2>:TRACk:REFerence
on page 801
DISPlay:SWEep<n2>:TRACk:SCALing
on page 801
Label Auto
This setting is for whether the label for the left (Trace A) or right (Trace B) y-axis is
oriented on the setting in the "Y-Source" parameter field, or is freely configurable.
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
"activated"
The label (which is selected under TRACE A or Trace B), i.e. the
name of the measurement result which is displayed as TRACE A or
Trace B, is displayed dimmed (not accessible) in the text field to the
right of the checkbox and also on the y-axis in the graphical display.
Figure 5-24: Here rotated by 90°.
Curve, Spectrum and Bar Graph Display