Rohde & Schwarz R&S UPP, User Manual

Page: 275 / 938

Instrument Functions
R&S
®
UPP
259 User Manual 1411.1055.32 ─ 10
This selection is not available for mono WAV files; they are always output on both gen-
erator channels.
Note: Whether a signal is actually output at both generator channels depends, as for
all generator signals, on the menu item of the same name in the Generator Config
panel.
"Mono Left" The left WAV channel is output on all active generator channels.
"Mono Right" The right WAV channel is output on all active generator channels.
"Stereo" The left WAV channel is output on generator channel 1, the right on
channel 2.
Remote command:
SOURce:PLAY:CHANnel
on page 708
Muting
"Muting" gives the option of switching off the generator when the measurement is com-
pleted and the generator signal is no longer needed.
"Off" The generator signal always remains switched on, independently of
the measurement. This setting is necessary if the generator is opera-
tion without the analyzer, or if the DUT requires a long settling time.
"After Meas" The generator signal is switched off when the (single) measurement
is completed. When a continuous measurement is in progress, the
generator signal also remains on continuously.
This setting is necessary if the measurement function or the DUT
requires a low level before the start of measurement, e.g. with the
R&S
UPP measurement function "Delay".
When the measurement is started, the generator signal is automati-
cally switched on. Since no signal is present before the measurement
is started, a potential delay of the DUT must be considered as "Start
Cond Delay".
Remote command:
SOURce:PLAY:MUTing
on page 709
Restart
Determines the behavior of the play file with generator settings.
Generator Signals