Rohde & Schwarz R&S UPP, User Manual

Page: 571 / 938

Instrument Functions
R&S
®
UPP
555 User Manual 1411.1055.32 ─ 10
Store Trace as
This specifies the format in which the current trace is to be stored.
Depending on this setting, further command lines for modifying the data set that has to
be stored are added or removed.
"Trace List" A trace is stored complete with all its scans, X and Y data, limit data
and reference values.
This file can be loaded as a trace file at parameter field "Y-Source",
File:
Trace A or File: Trace B and can be displayed.
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
"Equalization List"
A trace is stored as an equalization file in order to make it available to
the generator as a preemphasis file.
Each time an equalization file is stored the generator equalization file
is loaded again, regardless of whether or not "Modify Equ." is
enabled. Then whenever a new equalization file is saved the precor-
rector becomes immediately effective on the next sweep scan.
If the name of the stored equalization file and of the equalization file
used in the generator are not identical, a warning is issued to notify
that the newly created equalization file will now be used in the gener-
ator.
Available in the graphics subsystems
Sweep, FFT
"Sweep List" A trace is stored as a sweep list.
If an "Auto List "– or "Manu List " Sweep is set in the generator, the
sweep parameters are read from this file.
Available in the graphics subsystems
Sweep, FFT
"Limit List" A trace is stored as a limit list.
This file can be loaded at "Limit Upper" or "Limit
Lower". It can then
be displayed as a limit curve and used for limit monitoring.
Available in the graphics subsystems
Sweep, FFT, Bar Graph
Curve, Spectrum and Bar Graph Display