Rohde & Schwarz R&S UPP, User Manual

Page: 55 / 938

Startup
R&S
®
UPP
39 User Manual 1411.1055.32 ─ 10
sary, the power switch at the rear of the instrument can now be switched off without
any problems to completely disconnect the instrument from the AC supply.
●
With connected monitor, ext. keyboard and mouse
– Click on Start, Shut Down, OK or the red Shutdown icon.
– Shortcut Ctrl+Alt+Del, Shut down, OK
2.4 Function Check
The audio analyzer monitors the most important instrument functions automatically
when it is switched on.
2.5 Presets
●
Without connected monitor
A preset can be executed only via the remote control command (Common Com-
mand) *RST.
●
With connected monitor, ext. keyboard and mouse
Open the menu bar and select "Preset (Load Default)".
The preset function sets all parameters and settings, even those of inactive operating
modes.
The most important parameters set here are:
Generator frequency (analog) 1 kHz
Generator level (analog) 0.1 V
Generator signal Sinusoidal
Generator frequency (digital) 997 Hz
Generator level (digital) 0.1 FS
Generator signal Sinusoidal
Generator output impedance 25
Ω
Analyzer interface (analog) XLR measuring input (analog)
Analyzer interface (digital) Unbalanced input (BNC socket)
Analyzer function RMS
Presets