Rohde & Schwarz R&S UPP, User Manual

Page: 787 / 938

Remote Control - Command Description
R&S
®
UPP
771 User Manual 1411.1055.32 ─ 10
●
Level monitor is selected by using suffix
6
a t the
SENSe<n1>:FUNCtion
com-
mand.
see
SENSe<1|2|3|6|7|8>:FUNCtion
on page 752
●
Second monitor is activated by the following command:
SENSe2:FUNCtion:SNDMonitor <mode>
Parameters:
<mode> OFF | INPut | LEVel | FUNCtion
Manual operation: See " 2nd Monitor " on page 457
7.20 Settling Methods
The commands are assigned as follows:
●
SENSe:FUNCtion:...
Settling of the measurement function
●
SENSe:TRIGger:...
Settling of the start conditions (event-triggered measurements)
●
SENSe[1]:FUNCtion:SETTling:COUNt
on page 771
●
SENSe[1]:FUNCtion:SETTling:MODE
on page 771
●
SENSe[1]:FUNCtion:SETTling:RESolution
on page 772
●
SENSe[1]:FUNCtion:SETTling:TOLerance
on page 772
●
SENSe[1]:FUNCtion:SETTling:TOUT
on page 772
●
SENSe[1]:TRIGger:SETTling:COUNt
on page 771
●
SENSe[1]:TRIGger:SETTling:MODE
on page 771
●
SENSe[1]:TRIGger:SETTling:RESolution
on page 772
●
SENSe[1]:TRIGger:SETTling:TOLerance
on page 772
SENSe[1]:FUNCtion:SETTling:COUNt <count>
SENSe[1]:TRIGger:SETTling:COUNt <count>
Parameters:
<count> integer
Manual operation: See "Samples" on page 464
SENSe[1]:FUNCtion:SETTling:MODE <mode>
SENSe[1]:TRIGger:SETTling:MODE <mode>
Parameters:
<mode> OFF | EXPonential | FLAT | AVERage
Manual operation: See "Settling" on page 464
Settling Methods