Rohde & Schwarz R&S UPP, User Manual

Page: 347 / 938

Instrument Functions
R&S
®
UPP
331 User Manual 1411.1055.32 ─ 10
Depending on the number of channels of the supplied audio format, the options of
these checkboxes change.
Remote command:
INPut[1]:MCHannels<n2>
on page 722
Audio Bits
Word length used.
Value range: 8 ... 24
Remote command:
INPut[1]:AUDiobits
on page 725
Sample Freq
Setting of the audio sampling rate of the HDMI analyzer used for analysis. With the
"Auto" selection, the sampling rate of incoming audio data is automatically determined
and used for the analysis.
"Auto" The sampling rate present is automatically determined and set.
Note: The HDMI analyzer must be reinitialized with every new sam-
pling frequency. To avoid the need to repeat this time-consuming pro-
cedure too often, minor deviations and fluctuations (below 3
Hz) are
ignored.
"32...192 kHz" Standard sampling rates 32 kHz to 192 kHz
"Value:" Variable input of sampling rate
Value range for numeric input: 30.72
kHz ... 192 kHz
Remote command:
INPut[1]:SAMPle:FREQuency:MODE
on page 725
INPut[1]:SAMPle:FREQuency
on page 725
Pre Filter
Configuring the HDMI Analyzer