Rohde & Schwarz R&S UPP, User Manual

Page: 291 / 938

Instrument Functions
R&S
®
UPP
275 User Manual 1411.1055.32 ─ 10
Remote command:
SOURce:MCHannel<n2>:SINE:OFFSet:STATe
on page 714
SOURce:MCHannel<n2>:SINE:OFFSet:VOLTage
on page 714
Arbitrary
A signal with random frequency and shape and the level specified in "Volt Peak" is
added to the overall signal. The signal is determined by the "File" waveform file.
The checkbox enables or disables this function.
Remote command:
SOURce:MCHannel<n2>:SINE:ARBitrary:STATe
on page 713
MMEMory:LOAD:MCHannel<n3>:SINE:ARBitrary
on page 711
SOURce:MCHannel<n2>:SINE:ARBitrary:VOLTage
on page 713
Delay
Indicates the delay with which the arbitrary file is played back. This time can be set
individually for each channel and can be used, for example, to compensate for sound
propagation times.
Remote command:
SOURce:MCHannel<n2>:SINE:ARBitrary:DELay
on page 713
Time
Only available if "Arbitrary Mode" in the upper part of the panel is set to "Time manual".
"Time" is higher-level for all channels and indicates how long the arbitrary file is played
back. If the playback time of the file content is the same or longer than this time, the
output is ended or canceled after this time. If the playback time of the file content is
shorter, the file content is output in a loop until this time is reached. Afterwards, zero
samples are output.
The "Total Cont" setting makes "Time" into a pure display function, which shows the
time of the longest sum of the active arbitrary files and the associated delays.
Remote command:
SOURce:ARBitrary:TIME
on page 712
Reload
Causes (re-)loading of the arbitrary signal components.
Generator Signals