Rohde & Schwarz R&S UPP, User Manual

Page: 478 / 938

Instrument Functions
R&S
®
UPP
462 User Manual 1411.1055.32 ─ 10
Remote command:
SENSe[1]:FUNCtion:SETTling:MODE
on page 771
Samples
Designates the number of measured values to be covered by the settling algorithm, i.e.
it defines how many measured values are to be used in the settling measurement or
for averaging.
Note: In this exceptional case, the term "sample" is used to designate an internal mea-
surement result instead of a digital sample.
Remote command:
SENSe[1]:FUNCtion:SETTling:COUNt
on page 771
Tolerance
The tolerance value designates the maximum permissible value by which the current
measured value may differ from the preceding measured values so that it is still classi-
fied as settled.
With exponential settling, the selected tolerance value applies only to the difference
between the current and the last preceding measured value; for each earlier measured
value, the tolerance value increases by a factor of 2.
Remote command:
SENSe[1]:FUNCtion:SETTling:TOLerance
on page 772
Resolution
The resolution value designates the maximum permissible absolute value by which the
current measured value may differ from the preceding measured values in order to be
accepted as settled, although the tolerance condition may be violated. This means that
a measured value is regarded as not settled only if it fails to meet both the tolerance
and the resolution condition.
With exponential settling, the selected resolution value applies only to the difference
between the current and the last preceding measured value; for each earlier measured
value, the resolution increases by a factor of 2.
Remote command:
SENSe[1]:FUNCtion:SETTling:RESolution
on page 772
Timeout
Defines the maximum time that a settling algorithm is allowed to detect a settled result
after the start of a measurement.
Settling Methods