Rohde & Schwarz R&S UPP, User Manual

Page: 652 / 938

Instrument Functions
R&S
®
UPP
636 User Manual 1411.1055.32 ─ 10
To change the line type or thickness of a curve, select "Scan Line Style" or "Scan Line
Width". The Profile Editor changes as follows:
For these properties, the desired trace and scan must be selected. With Scan 0, the
property is set for the current curve. Other scan values are only used for functions
where multiple curves from repeated measurements are saved temporarily. The
numeric value for thickness must be confirmed with ENTER.
If you press OK in the Profile Editor before the current settings have been saved, a
query appears asking whether you want to save these settings.
Printing and Saving