Rohde & Schwarz R&S UPP, User Manual

Page: 812 / 938

Remote Control - Command Description
R&S
®
UPP
796 User Manual 1411.1055.32 ─ 10
Manual operation: See "Reference Value" on page 526
DISPlay:FFT<n2>:A:SPACing <spacing>
DISPlay:FFT<n2>:B:SPACing <spacing>
DISPlay:WAVeform<n2>:A:SPACing <spacing>
DISPlay:WAVeform<n2>:B:SPACing <spacing>
DISPlay:BARGraph<n2>:A:SPACing <spacing>
DISPlay:BARGraph<n2>:B:SPACing <spacing>
DISPlay:SWEep<n2>:A:SPACing <spacing>
DISPlay:SWEep<n2>:B:SPACing <spacing>
Parameters:
<spacing> LINear | LOGarithmic
Manual operation: See "Spacing" on page 533
DISPlay:FFT<n2>:A:TOP <top>
DISPlay:FFT<n2>:B:TOP <top>
DISPlay:WAVeform<n2>:A:TOP <top>
DISPlay:WAVeform<n2>:B:TOP <top>
DISPlay:BARGraph<n2>:A:TOP <top>
DISPlay:BARGraph<n2>:B:TOP <top>
DISPlay:SWEep<n2>:A:TOP <top>
DISPlay:SWEep<n2>:B:TOP <top>
Parameters:
<top> float
Manual operation: See "Top" on page 534
DISPlay:FFT<n2>:A:UNIT <unit>
DISPlay:FFT<n2>:B:UNIT <unit>
DISPlay:WAVeform<n2>:A:UNIT <unit>
DISPlay:WAVeform<n2>:B:UNIT <unit>
DISPlay:BARGraph<n2>:A:UNIT <unit>
DISPlay:BARGraph<n2>:B:UNIT <unit>
DISPlay:SWEep<n2>:A:UNIT <unit>
DISPlay:SWEep<n2>:B:UNIT <unit>
It is recommended to use the command recording in order to find the correct unit
parameter, see
Chapter 6.7, "Command Recording" , on page 661 .
Parameters:
<unit> string
Manual operation: See "Unit" on page 530
DISPlay:FFT<n2>:A:UNIT:AUTO <state>
DISPlay:FFT<n2>:B:UNIT:AUTO <state>
DISPlay:WAVeform<n2>:A:UNIT:AUTO <state>
DISPlay:WAVeform<n2>:B:UNIT:AUTO <state>
Traces, Spectrum Displays and Bargraphs