Rohde & Schwarz R&S UPP, User Manual

Page: 788 / 938

Remote Control - Command Description
R&S
®
UPP
772 User Manual 1411.1055.32 ─ 10
SENSe[1]:FUNCtion:SETTling:RESolution <resolution>
SENSe[1]:TRIGger:SETTling:RESolution <resolution>
Parameters:
<resolution> float
Manual operation: See "Resolution" on page 465
SENSe[1]:FUNCtion:SETTling:TOLerance <tolerance>
SENSe[1]:TRIGger:SETTling:TOLerance <tolerance>
Parameters:
<tolerance> float
Manual operation: See "Tolerance" on page 465
SENSe[1]:FUNCtion:SETTling:TOUT <tout>
Parameters:
<tout> float
Manual operation: See "Timeout" on page 462
7.21 Filters
The R&S UPP offers several positions to switch on predefined filters:
●
Analyzer pre-filter
command
INPut:FILTer
This filter is inserted prior to the analysis functions.
●
Analyzer function filter
command
SENSe:FILTer<n2>
.
Depending on the instrument and the active analyzer function, up to three filters
can be connected in series. They are selected by suffix <n2>.
●
Generator function filter
–
command
SOURce:FILTer
for several generator functions
– command
SOURce:MCHannel<n2>:FILTer
for generator function "Universal".
– command
SOURce:STEReo2:FILTer
for generator function "Stereo Sine".
The
SENSe:UFILter
command is used to configure user filters.The user defined fil-
ters can be used for the generator and analyzer functions.
●
INPut[1]:FILTer
on page 773
●
SENSe[1]:FILTer<n2>
on page 773
●
SENSe[1]:UFILter<n2>
on page 774
●
SENSe[1]:UFILter<n2>:ATTenuation
on page 774
Filters