Rohde & Schwarz R&S UPP, User Manual

Page: 859 / 938

Remote Control - Command Description
R&S
®
UPP
843 User Manual 1411.1055.32 ─ 10
Usage: Query only
STATus:XQUEstionabl:ENABle <integer>
The command sets the bits of the
ENABle
part of the
STATus:XQUEstionable
regis-
ter. This setting determines which events of the
EVENt
part of the
STATus:XQUEStionable
register are to be passed on to the summary bit of the sta-
tus byte. These events can be used to trigger a service request.
Parameters:
<integer> 0...32767
STATus:XQUEstionabl:EVENt?
The command queries the content of the
EVENt
part of the
STATus:XQUEStionable
register. This part contains the information about the current instrument state since the
last readout.
A bit set in the
EVENt
register indicates a change of the corresponding bit in the
CONDition
register. Whether bits in the
EVENt
register are set due to a bit transition
from 0 to 1 or from 1 to 0 depends on the bits set in the
PTRansition
and the
NTRansition
registers.
Reading the information clears the register.
Return values:
<argument> integer
Usage: Query only
STATus:XQUEstionabl:NTRansition <integer>
The command sets the bits of the
NTRansition
part of the
STATus:XQUEStionable
register. A bit set in the
NTRansition
register causes a
bit transition from 1 to 0 in the
CONDition
register to produce an entry in the
EVENt
register.
Reading the information does not clear the register.
Parameters:
<integer> 0...32767
STATus:XQUEstionabl:PTRansition <integer>
The command sets the bits of the
PTRansition
part of the
STATus:XQUEStionable
register. A bit set in the
PTRansition
register causes a
bit transition from 0 to 1 in the
CONDition
register to produce an entry in the
EVENt
register.
Reading the information does not clear the register.
STATus Subsystem