Rohde & Schwarz R&S UPP, User Manual

Page: 254 / 938

Instrument Functions
R&S
®
UPP
238 User Manual 1411.1055.32 ─ 10
Filter
The filter can be selected for both channels together (Track) or separately from each
other (Split).
Remote command:
SOURce:FILTer:CHANnels
on page 701
Filter / Filter Ch1
Common filter for channel 1 and channel 2, if "Track" filter was selected. Filter for
channel 1, if "Split" filter was selected.
The generator signal is filtered in the time domain. One of the user
‑
definable filters in
the Filter panel or a weighting filter can be selected. All level settings apply to the unfil-
tered signal.
Remote command:
SOURce:FILTer
on page 776
For a description of the filters and their setting parameters, see Chapter 5.39.4, "Filter
Table" , on page 468.
Filter Ch2
Filter for channel 2, if "Split" filter was selected.
The generator signal is filtered in the time domain. One of the user
‑
definable filters in
the Filter panel or a weighting filter can be selected. All level settings apply to the unfil-
tered signal.
Remote command:
SOURce:STEReo<n2>:FILTer
on page 777
Equalizer
The equalizer can be selected for both channels together (Track) or separately from
each other (Split).
Remote command:
SOURce:VOLTage:EQUalize:CHANnels
on page 702
Equalizer / Equalizer Ch1
Common equalizer for channel 1 and channel 2, if "Track" equalizer was selected.
Equalizer for channel 1, if "Split" equalizer was selected.
The generator signal is equalized in the frequency domain using the file selected in the
"Equal File/Equal File Ch1" parameter field. The checkbox enables or disables this
function. The equalization is the same for both channels.
Generator Signals