Rohde & Schwarz R&S UPP, User Manual

Page: 241 / 938

Instrument Functions
R&S
®
UPP
225 User Manual 1411.1055.32 ─ 10
"Pattern" Available only with the R&S UPP-K45 (expanded audio/video mea-
surements) option.
Generation of test patterns.
Remote command:
SOURce:HDMI:VIDeo:CONTent
on page 695
Pattern Config
Editor for generating test patterns.
Color Depth
Selection of color depth of the picture data in bit.
Remote command:
SOURce:HDMI:VIDeo:COLor:DEPTh
on page 695
Color
If "Pattern" = "Monochrome" was selected, the color of the picture to be output can be
configured with the color selection dialog. In the following parameter field, the colors
are always shown as decimal equivalents of 12-bit long numeric values. With a lower
color depth in the "Color Depth" selection field, the corresponding LSBs are not trans-
mitted, but set to 0.
RGB string
If "Pattern" = "Monochrome" was selected, the color selection from the color selection
dialog above is mapped as RGB string and can be configured here, if necessary. In
each case, the decimal equivalent of 12-bit long numeric values is mapped. With a
lower color depth in the "Color Depth" selection field, the corresponding LSBs are not
transmitted, but set to 0.
AVI
Available only with the R&S UPP-K45 (expanded audio/video measurements) option.
Opens a dialog in which the currently set AVI Info Frame of the generator is shown.
The data structure of this Info Frame is specified in the CEA-861 standard.
SPD
Available only with the R&S UPP-K45 (expanded audio/video measurements) option.
Configure HDMI Generator