Rohde & Schwarz R&S UPP, User Manual

Page: 157 / 938

Manual Operation
R&S
®
UPP
141 User Manual 1411.1055.32 ─ 10
4.7.12 Adopting Parameters – Track Box
In many cases, settings are to apply e.g. to both measurement channels or to both
traces. Here the R&S
UPP provides multi-column panels which allow settings to be
transferred from the left-hand to the right-hand column without the parameter having to
be entered a second time.
The track boxes, which are displayed in a separate column, are used for this purpose.
Track boxes always apply to an entire function group.
If the track box is activated, all of the settings within the function group apply to both
columns. All fields with transferred settings in the right-hand column are shown as dis-
play fields. They appear gray and cannot be accessed while the track function is
active. If a setting is changed in the associated parameter field in the left-hand column,
this change is also shown in the display field in the right-hand column.
4.7.13 Input Help
Information on the possible entries is given at the bottom of the screen above the soft-
key bar. The units offered in the softkey bar and the limits specified in the
"Valid
Range" field always refer to the highlighted parameter field. The valid value
range is given in the unit currently selected.
Entries outside the specified value range are not accepted; an audible warning is
issued and the entry is changed to its permissible minimum or maximum value.
The specified ranges for value entries always take the current status of the instrument
into consideration. They are therefore not constant and depend on the presets already
configured for other parameters.
Settings in the Panels