Rohde & Schwarz R&S UPP, User Manual

Page: 75 / 938

Startup
R&S
®
UPP
59 User Manual 1411.1055.32 ─ 10
●
the Windows 95 operating system or higher and the Remote Desktop Connection
program are installed on the external computer and a LAN interface is configured
for the network
●
the audio analyzer and the computer are connected via LAN (see Chapter 2.10.2,
"Configuration of R&S UPP for Network Operation" , on page 46),
●
the Remote Desktop Connection program is activated on the audio analyzer (see
Chapter 2.10.4.1, "Activating the Remote Desktop Connection program at the R&S
UPP"
, on page 59),
●
on the external computer, the R&S UPP data have been entered in the Remote
Desktop Connection program (IP address or computer name of R&S UPP in the
network (see
Chapter 2.10.2.3, "Querying the computer name" , on page 50),
●
the login at the external computer for R&S UPP was performed with the correct
user name (instrument) and the correct password (instrument) (see
Chap-
ter 2.10.4.2, "Starting manual remote operation at the external computer" ,
on page 60).
2.10.4.1 Activating the Remote Desktop Connection program at the R&S UPP
Unauthorized access possible to audio analyzer
After activating Remote Desktop, access to this R&S UPP is possible for any user in
the network who knows the computer name and the login data of the audio analyzer.
When using Windows 7 Remote Desktop Connection is enabled by default.
Activating Remote Desktop when using Windows XP:
1. "Start – Settings – Control Panel": Click on "Performance and Maintenance".
2. "Click on System" and select "Remote" in the tab menu.
3. Activate the "Allow users to connect remotely to this computer" check box.
Connect R&S UPP to a Network (LAN)