Rohde & Schwarz R&S UPP, User Manual

Page: 552 / 938

Instrument Functions
R&S
®
UPP
536 User Manual 1411.1055.32 ─ 10
If, for example, 2 is entered, the y-axis is divided into two sections , i.e. one main grid-
line is displayed.
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
Steps
With the setting Spacing = Lin:
Used to enter the main gridline step size for a y-axis.
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
Sub Grid
Subdivision of the main gridlines in a graphical display using subgridlines.
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
"Off" Subgridlines are deactivated.
"2, 4 , 5 "
With the setting Spacing = Lin:
Subdivision of the main gridlines of a y-axis into 2, 4 or 5 sections.
If, for example, 2 is selected, the area between two main gridlines is
divided into
2 sections, i.e. one subgridline appears between the
main gridlines.
These subgridlines are
not hidden if the graphical window is reduced
in size!
"Coarse , Fine "
With the setting Spacing = Log:
Coarse or fine subdivision of the main gridlines of a y-axis with sub-
gridlines.
Coarse : Only Subgridlines 2 and 5
Fine : All subgridlines
Limit Upper
It is possible to define for a measurement an upper limit / limit curve, such that each
measured value is compared with the upper limit or limit curve. The limit / limit curve is
plotted in red in the coordinate system of the graphical display.
Curve, Spectrum and Bar Graph Display