Rohde & Schwarz R&S UPP, User Manual

Page: 59 / 938

Startup
R&S
®
UPP
43 User Manual 1411.1055.32 ─ 10
Connection
To prevent damage to the monitor and R&S UPP, the instrument must be switched off
before an external monitor is connected. After connection, the external monitor is
detected when the instrument is started (but not if it is connected while the instrument
is in operation). The screen contents with all elements, e.g. panels, measurement dis-
plays, softkey bar, etc., appear on the external monitor. No further settings are needed.
2.8.1 Changing Screen Resolution of External Monitor under Win-
dows XP
The R&S UPP audio analyzer is equipped with an internal computer. The setting of the
screen resolution when using an external monitor is described below.
Setting external monitor resolution to higher than 800 x 600 pixels
1. Right-click the desktop to open the context menu.
2. Select "Graphics Properties ...".
3. A dialog box opens in which a screen resolution can be selected, e.g. "1024 x 768".
4. Click on "Apply".
5. Click "OK" to confirm the change, and then click "OK" again to close the window.
Resetting the External Monitor to a Resolution of 800 x 600 Pixels
The external monitor, mouse and keyboard are connected to the R&S UPP, the R&S
UPP is switched on.
1. Exit or minimize the UPP program by clicking the
buttons on the right in the
title bar.
2. Right-click on the desktop to open the following context menu again:
3. "No Digital Display"
The resolution is reset to 800 x 600.
Connecting an External Monitor