Rohde & Schwarz R&S UPP, User Manual

Page: 155 / 938

Manual Operation
R&S
®
UPP
139 User Manual 1411.1055.32 ─ 10
Function Computer keyboard Mouse
Entering a new value:
(Edit mode)
Highlight the numeric entry field
and enter the new value directly
using the number keys. ---
Changing individual numbers
(Edit mode)
Highlight the numeric entry field,
position the digit cursor with the >
or < cursor keys and enter the
new digit directly using the
numeric keys. ---
Finishing value entry Complete entry with the ENTER
key. ---
Finishing value entry with unit
selection Use the F5 to F12 keys to select
the desired unit or
Complete the entry with the keys
m, k, etc. to enter the value, e.g.
as mV or kHz.
Click the softkey button with the
desired unit.
Exit value entry without adopting
the value Press the ESC key. Click in a different entry field.
Changing a value
(Direct mode)
Highlight the numeric entry field,
switch to Direct mode with the
Enter key, position the digit cursor
with the > or < cursor keys and
enter the new digit directly using
the numeric keys. All changes are
set directly in the hardware. ---
Varying a value
(Direct mode)
Highlight the numeric entry field,
switch to Direct mode with the
Enter key; position the digit cursor
with the > or < cursor keys.
Change the numeric value with
the UP/DOWN cursor keys.
All changes are set directly in the
hardware.
---
Changing units Highlight the numeric entry field,
select the unit using the F5 to F12
keys.
The physical value is converted to
the new numeric value with the
newly selected unit.
Highlight the numeric entry field,
click the appropriate softkey but-
ton to select the unit.
The physical value is converted to
the new numeric value with the
newly selected unit.
4.7.10 Alphanumeric Entries – Text Entry Fields
When the focus is moved to a text entry field, the system enters Edit mode, which is
indicated by a green selection frame.
The first key stroke automatically deletes the old text. Enter characters as usual.
If certain characters only are to be changed, position the cursor accordingly using the
cursor keys and enter the new characters (if the position of the cursor is changed
Settings in the Panels