Rohde & Schwarz R&S UPP, User Manual

Page: 828 / 938

Remote Control - Command Description
R&S
®
UPP
812 User Manual 1411.1055.32 ─ 10
SENSe<1|2|6>:REFerence <reference>
Suffix:
<1|2|6>
.
specifies the type of measurement.
1 = function measurement (level / signal to noise / distortion, ...)
2 = input or second monitor measurement
6 = level monitor measurement
Parameters:
<reference> float
Manual operation: See "Reference" on page 588
SENSe<1|2|6>:REFerence:MODE <mode>
Suffix:
<1|2|6>
.
specifies the type of measurement.
1 = function measurement (level / signal to noise / distortion, ...)
2 = input or second monitor measurement
6 = level monitor measurement
Parameters:
<mode> CH1Meas | CH2Meas | VALue | STORe | SOURce | GENTrack |
MREFchannel | CH1Store | CH2Store | CH3Store | CH4Store |
CH5Store | CH6Store | CH7Store | CH8Store
Manual operation: See "Reference" on page 588
SENSe<1|2|6>:RIGHt <right>
Suffix:
<1|2|6>
.
specifies the type of measurement.
1 = function measurement (level / signal to noise / distortion, ...)
2 = input or second monitor measurement
6 = level monitor measurement
Parameters:
<right> float
Manual operation: See "Right" on page 590
SENSe<1|2|6>:UNAuto <unauto>
Suffix:
<1|2|6>
.
specifies the type of measurement.
1 = function measurement (level / signal to noise / distortion, ...)
2 = input or second monitor measurement
6 = level monitor measurement
Parameters:
<unauto> ON | OFF
Manual operation: See "Unit Auto" on page 585
Combi Display