Rohde & Schwarz R&S UPP, User Manual

Page: 537 / 938

Instrument Functions
R&S
®
UPP
521 User Manual 1411.1055.32 ─ 10
Remote command:
DISPlay:SWEep<n2>:A:YSOurce:FILE
on page 798
DISPlay:SWEep<n2>:B:YSOurce:FILE
on page 798
Channel
Channel number for multichannel instrument
For multichannel instruments it is no longer possible to show the source of the mea-
surement results and the channel numbers in a combined display, due to the large
number of possible combinations in the selection list for the Y-source. The source of
the measurement results (Y-Source) and the channel number (Channel) are therefore
offered in separate parameter fields.
For "Y-Source = OFF", "File: Trace A" or "File: Trace B", a channel specification is
meaningless and this parameter field is hidden.
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
"Ch1 to Ch8" Channel number 1 to 8
Remote command:
DISPlay:SWEep<n2>:A:CHANnel
on page 790
DISPlay:SWEep<n2>:B:CHANnel
on page 790
Track
If a checkbox is available in the "Track" column, the settings for the parameters con-
cerned can be transferred from "TRACE
A" to "TRACE B". The horizontal partition lines
in the panel indicate the parameters for which tracking applies. Tracking capabilities
are available for the "Reference ", "Scaling " and "Limit "functions.
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
Curve, Spectrum and Bar Graph Display