Rohde & Schwarz R&S UPP, User Manual

Page: 484 / 938

Instrument Functions
R&S
®
UPP
468 User Manual 1411.1055.32 ─ 10
Analog generator:
In the Generator Config panel, set "Voltage Range" to "Fix", and in the Generator
Function, panel set the level low enough to ensure that the amplified level will always
be less than the selected fixed voltage range.
Example:
Here the maximum allowable gain of the filter is 4 (12 dB).
Digital generator:
Select a level that is low enough to ensure that the level plus the maximum gain of the
filter will always be less than the full-scale level.
With both types of generator (analog and digital), any DC offset that has been config-
ured must be taken into account when setting the level.
5.39.4 Filter Table
Overview of the filters which can be set up in the analyzer and generator, together with
the remote-control parameters.
Table 5-5: Filter Deactivated
Display in Selection field Remote-Control Parameter
OFF OFF
Table 5-6: User-Definable Filters
Defined in Filter Panel as Remote-Control Parameter
Filter 01 UFIL1
Filter 02 UFIL2
Filter 03 UFIL3
Filter 04 UFIL4
Filter 05 UFIL5
Filter 06 UFIL6
Filter 07 UFIL7
Filter 08 UFIL8
Filter 09 UFIL9
Filter