Rohde & Schwarz R&S UPP, User Manual

Page: 728 / 938

Remote Control - Command Description
R&S
®
UPP
712 User Manual 1411.1055.32 ─ 10
SOURce:ACHSine:VOLTage <voltage>
Parameters:
<voltage> float
Manual operation: See "Voltage" on page 272
SOURce:ARBitrary:MODE <mode>
Parameters:
<mode> TOCont | TIMManual
Manual operation: See "Arbitrary Mode" on page 270
SOURce:ARBitrary:RELoad <state>
Parameters:
<state> ONCE | EXEC
Manual operation: See "Reload" on page 275
SOURce:ARBitrary:TIME <time>
Parameters:
<time> float
Manual operation: See "Time" on page 275
SOURce:LIPSync:PATTern:AUDioactive:COLor:STRing <string>
Parameters:
<string> string
SOURce:LIPSync:PATTern:MUTE:COLor:STRing <string>
Parameters:
<string> string
SOURce:MCHannel<n2>:ACHSine:STATe <state>
Suffix:
<n2>
.
1 to 10
Note: The following description of the suffix is valid for all
SOURce:MCHannel:...
commands.
<n2> = 1 to 8 when option UPP-B4 is implemented and the I
2
S
generator is selected, or when the HDMI generator with audio
format "PCM 8 Ch Layer 1" is selected.
<n2> = 3 to 10 when option UPP-B8 is implemented and the
analog or digital audio generator is selected.
Generator Settings