Rohde & Schwarz R&S UPP, User Manual

Page: 295 / 938

Instrument Functions
R&S
®
UPP
279 User Manual 1411.1055.32 ─ 10
RGB String
Color to be output if no audio data are present.
The color selection from the above color selection dialog above is mapped as RGB
string and can be configured here, if necessary. In each case, the decimal equivalent
of 12-bit long numeric values is mapped. With a lower color depth in the "Color Depth"
selection field, the corresponding LSBs are not transferred, but set to 0.
Active Color
Color to be output if audio data are output.
The color can be configured using the color selection dialog. In the following parameter
field, the colors are always shown as decimal equivalents of 12-bit long numeric val-
ues. With a lower color depth in the "Color Depth" selection field, the corresponding
LSBs are not transferred, but set to 0.
RGB String
Color to be output if audio data are output.
The color selection from the above color selection dialog above is mapped as RGB
string and can be configured here, if necessary. In each case, the decimal equivalent
of 12-bit long numeric values is mapped. With a lower color depth in the "Color Depth"
selection field, the corresponding LSBs are not transferred, but set to 0.
5.7 Equalization
The generator can be given a predefined frequency response using a table containing
frequency points and the associated gain factors. The set amplitude of the generator is
automatically changed as a function of frequency in accordance with the table.
Equalizer
Activating/deactivating the precorrection.
Remote command:
SOURce:VOLTage:EQUalize
on page 699
Equal File
Selection of the table.
The button opens a browser that you can use to select the precorrection file.
Equalization