Rohde & Schwarz R&S UPP, User Manual

Page: 284 / 938

Instrument Functions
R&S
®
UPP
268 User Manual 1411.1055.32 ─ 10
5.6.13 Universal
The "Universal" generator function is available
●
in the 2
‑
channel "Analog" generator instrument, with installed 8
‑
channel
R&S UPP
‑
B8 option (multichannel audio generator).
●
with installed R&S UPP
‑
B2 option (digital audio interfaces) in the 2
‑
channel "Digi-
tal Audio" generator instrument, with installed 8
‑
channel R&S UPP
‑
B8 option
(multichannel audio generator).
●
with installed R&S UPP
‑
B2 option (digital audio interfaces) in the 2
‑
channel "I2S"
generator instrument, with installed R&S UPP
‑
B4 option (HDMI and digital audio
interfaces) in the 8
‑
channel "I2S" generator instrument.
●
with installed R&S UPP
‑
B4 option (HDMI and digital audio interfaces) and the
8
‑
channel "HDMI" generator instrument.
The "Universal" function provides a generator signal for 2 or 8 channels; this signal is
configured using common settings for all channels and individually for each channel.
The corresponding panel areas are identified by the headings "All Channel Settings"
and "Single Channel Settings".
Common to all channels is a noise signal (dither), a higher-level sine wave, the
option for equalizing the higher-level sine wave and the playback time of the arbitrary
files. The higher-level sine wave can also be swept in frequency and/or amplitude.
Individually for every individual channel , it is possible to set a filter, a sine wave, an
equalizer acting on its level, a DC Offset, an arbitrary signal, a delay with which an
arbitrary file is played back, and the higher-level sine wave with a percentage share.
Generator Signals