Rohde & Schwarz R&S UPP, User Manual

Page: 226 / 938

Instrument Functions
R&S
®
UPP
210 User Manual 1411.1055.32 ─ 10
Setting range: 0 V to 2,125 V
This voltage is linked to the setting for the BAL amplitude and is always a quarter of
this amplitude.
Remote command:
OUTPut:SIGNal:LEVel
on page 691
Ref Voltage
Reference value for the relative amplitude units.
If this reference value is changed, all amplitude settings linked to the reference value
also change.
Remote command:
SOURce:VOLTage:REFerence
on page 689
Ref Frequency
Reference value for the relative frequency units.
If the reference frequency is changed, all frequency settings linked to the reference
value also change.
Remote command:
SOURce:FREQuency:REFerence
on page 689
5.3.2 Interface Assignment
5.3.2.1 R&S UPP-B2 digital audio interfaces
Use of the R&S UPP-B2 (digital audio interfaces) option for 2-channel generation and
analysis.
DIGITAL OUT
BNC output for the SPDIF or AES/EBU format according to EIAJ CP-340 and optical
output according to TOSLINK system
DIGITAL IN
BNC input for the SPDIF or AES/EBU format according to EIAJ CP-340 and optical
input according to TOSLINK system
SYNC IN
BNC input for synchronization signals with switchable termination.
Configuring the Digital Generator