manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 126

Configuration

R&S

®

FSW-K7

126

User Manual 1173.9240.02 ─ 17

on page 124) and "Phones Output", adjust the volume setting using the rotary knob on
the front panel.

Remote command: 

OUTPut:

​

ADEMod[:

​

ONLine]:

​

PHONes

​

 

on page 231

5.10 Automatic Settings

Some settings can be adjusted by the R&S

 

FSW automatically according to the current

measurement settings.

To activate the automatic adjustment of a setting, select the corresponding function in
the AUTO SET menu or in the configuration dialog box for the setting, where available.

MSRA/MSRT operating mode

In MSRA/MSRT operating mode, settings related to data acquisition cannot be adjus-
ted for Analog Demodulation applications.

Adjusting all Determinable Settings Automatically (Auto All)

...................................... 126

Adjusting the Center Frequency Automatically (Auto Freq)

........................................ 126

Setting the Reference Level Automatically (Auto Level)

............................................. 127

Resetting the Automatic Measurement Time (Meastime Auto)

...................................127

Changing the Automatic Measurement Time (Meastime Manual)

.............................. 127

Upper Level Hysteresis

............................................................................................... 127

Lower Level Hysteresis

............................................................................................... 127

AF Auto Scale

............................................................................................................. 128

Adjusting all Determinable Settings Automatically (Auto All)

Activates all automatic adjustment functions for the current measurement settings.

This includes:

●

Auto Frequency

●

Auto Level

●

"AF Auto Scale"

 

on page 119

This function is only available for the MSRA/MSRT Master, not for the applications.

Remote command: 

[SENSe:

​

]ADJust:

​

ALL

​

 

on page 267

Adjusting the Center Frequency Automatically (Auto Freq)

This function adjusts the center frequency automatically.

The optimum center frequency is the frequency with the highest S/N ratio in the fre-
quency span. As this function uses the signal counter, it is intended for use with sinus-
oidal signals.

This function is not available for input from the Digital Baseband Interface (R&S

 

FSW-

B17).

Remote command: 

[SENSe:

​

]ADJust:

​

FREQuency

​

 

on page 268

 

Automatic Settings

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands