manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 204

Remote Commands for Analog Demodulation Measurements

R&S

®

FSW-K7

204

User Manual 1173.9240.02 ─ 17

<SampleRate>

Maximum or currently used sample rate of the connected device
in Hz (depends on the used connection protocol version; indica-
ted by <SampleRateType> parameter)

<MaxTransferRate> Maximum data transfer rate of the connected device in Hz

<ConnProtState>

State of the connection protocol which is used to identify the
connected device.

Not Started
Has to be Started
Started
Passed
Failed
Done

<PRBSTestState>

State of the PRBS test.

Not Started
Has to be Started
Started
Passed
Failed
Done

<SampleRateType>

0

Maximum sample rate is displayed

1

Current sample rate is displayed

<FullScaleLevel>

The level (in dBm) that should correspond to an I/Q sample with
the magnitude "1" (if transferred from connected device);
If not available, 

9.97e37

 is returned

Example: 

INP:DIQ:CDEV?

Result:

1,SMU200A,103634,Out
A,70000000,100000000,Passed,Not Started,0,0

Manual operation:

See 

"Connected Instrument"

 

on page 70

INPut:DIQ:RANGe[:UPPer]:AUTO 

<State>

If enabled, the digital input full scale level is automatically set to the value provided by
the connected device (if available).

This command is only available if the optional Digital Baseband interface (option
R&S

 

FSW-B17) is installed.

Parameters:

<State>

ON | OFF
*RST: 

OFF

Configuring the Measurement

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands