manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 284

Remote Commands for Analog Demodulation Measurements

R&S

®

FSW-K7

284

User Manual 1173.9240.02 ─ 17

LAYout:ADD[:WINDow]? 

<WindowName>,<Direction>,<WindowType>

This command adds a window to the display.

This command is always used as a query so that you immediately obtain the name of
the new window as a result.

To replace an existing window, use the 

LAYout:

​

REPLace[:

​

WINDow]

​

 command.

Parameters:

<WindowName>

String containing the name of the existing window the new win-
dow is inserted next to.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows, use the

LAYout:

​

CATalog[:

​

WINDow]?

​

 query.

<Direction>

LEFT | RIGHt | ABOVe | BELow
Direction the new window is added relative to the existing win-
dow.

<WindowType>

text value
Type of result display (evaluation method) you want to add.
See the table below for available parameter values.

Return values: 

<NewWindowName> When adding a new window, the command returns its name (by

default the same as its number) as a result.

Example: 

LAY:ADD? '1',LEFT,MTAB

Result:

'2'

Adds a new window named '2' with a marker table to the left of
window 1.

Example: 

LAY:ADD? '1',BEL,'XTIM:AM:RELative[:TDOMain]'

Adds an AM Time Domain display below window 1.

Usage: 

Query only

Manual operation:

See 

"AM Time Domain"

 

on page 15

See 

"FM Time Domain"

 

on page 16

See 

"PM Time Domain"

 

on page 17

See 

"AM Spectrum"

 

on page 18

See 

"FM Spectrum"

 

on page 19

See 

"PM Spectrum"

 

on page 20

See 

"RF Time Domain"

 

on page 21

See 

"RF Spectrum"

 

on page 22

See 

"Result Summary"

 

on page 23

See 

"Marker Table"

 

on page 24

See 

"Marker Peak List"

 

on page 25

Configuring the Result Display

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands