manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 272

Remote Commands for Analog Demodulation Measurements

R&S

®

FSW-K7

272

User Manual 1173.9240.02 ─ 17

Parameters:

<State>

ON

The automatic reset is off.

OFF

The automatic reset is on.
*RST: 

OFF

Example: 

DISP:WIND:TRAC3:MODE:HCON ON

Switches off the reset function.

Manual operation:

See 

"Hold"

 

on page 131

DISPlay[:WINDow<n>]:TRACe<t>:SELect

This command selects the trace specified by the index <t> in the window specified by
the index <n>. Only traces that are active in the specified result display can be
selected. The selected trace is used to determine the "Result Summary" for the corre-
sponding result display (see 

"Result Summary"

 

on page 23).

The query returns the number of the currently selected trace in the window specified by
the index <n> (trace index is ignored). Traces can only be queried for graphical result
displays (not Result Summary, Marker Table or Peak Marker List).

Return values: 

<TraceNo>

Number of the currently selected trace.

Example: 

DISP:TRAC3:SEL

Usage: 

SCPI confirmed

DISPlay[:WINDow<n>]:TRACe<t>[:STATe] 

<State>

This command turns a trace on and off.

The measurement continues in the background.

Parameters:

<State>

ON | OFF | 0 | 1
*RST: 

1 for TRACe1, 0 for TRACe 2 to 6

Example: 

DISP:TRAC3 ON

Usage: 

SCPI confirmed

Manual operation:

See 

"Trace 1/Trace 2/Trace 3/Trace 4 (Softkeys)"

 

on page 132

[SENSe:]ADEMod:AM[:ABSolute][:TDOMain][:TYPE]
[SENSe:]ADEMod:AM:RELative[:TDOMain][:TYPE]
[SENSe:]ADEMod:AM:RELative:AFSPectrum[:TYPE]
[SENSe:]ADEMod:FM[:TDOMain][:TYPE]
[SENSe:]ADEMod:FM:AFSPectrum[:TYPE]
[SENSe:]ADEMod:PM[:TDOMain][:TYPE]

Configuring the Measurement

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands