manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 133

Analysis

R&S

®

FSW-K7

133

User Manual 1173.9240.02 ─ 17

6.2 Trace / Data Export Configuration

The standard data management functions (e.g. saving or loading instrument settings)
that are available for all R&S

 

FSW applications are not described here.

See the R&S

 

FSW User Manual for a description of the standard functions.

Trace and data export settings can be configured in the "Traces" dialog box ("Trace/
Data Export" tab).

Export all Traces and all Table Results

.......................................................................133

Include Instrument Measurement Settings

..................................................................133

Trace to Export

............................................................................................................134

Decimal Separator

...................................................................................................... 134

Export Trace to ASCII File

.......................................................................................... 134

Export all Traces and all Table Results

Selects all displayed traces and result tables (e.g. Result Summary, marker table etc.)
in the current application for export to an ASCII file.

Alternatively, you can select one specific trace only for export (see 

Trace to Export

).

The results are output in the same order as they are displayed on the screen: window
by window, trace by trace, and table row by table row.

Remote command: 

FORMat:

​

DEXPort:

​

TRACes

​

 

on page 293

Include Instrument Measurement Settings

Includes additional instrument and measurement settings in the header of the export
file for result data.

 

Trace / Data Export Configuration

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands