manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 71

Configuration

R&S

®

FSW-K7

71

User Manual 1173.9240.02 ─ 17

Note: 

If you close the R&S DigIConf window using the "Close" icon, the window is

minimized, not closed.
If you select the "File > Exit" menu item in the R&S DigIConf window, the application is
closed. Note that in this case the settings are lost and the EX-IQ-BOX functionality is
no longer available until you restart the application using the "DigIConf" softkey in the
R&S

 

FSW once again.

5.4.1.4

Analog Baseband Input Settings

The following settings and functions are available to provide input via the Analog Base-
band Interface (R&S

 

FSW-B71) in the applications that support it.

They can be configured via the INPUT/OUTPUT key, in the "Input" dialog box.

For more information on the Analog Baseband Interface (R&S

 

FSW-B71) see the

R&S

 

FSW I/Q Analyzer and I/Q Input User Manual.

Analog Baseband Input State

....................................................................................... 71

I/Q Mode

....................................................................................................................... 71

Input configuration

.........................................................................................................72

Center Frequency

......................................................................................................... 72

Analog Baseband Input State

Enables or disable the use of the "Analog Baseband" input source for measurements.
"Analog Baseband" is only available if the Analog Baseband Interface (R&S

 

FSW-B71)

is installed.

Remote command: 

INPut:

​

SELect

​

 

on page 184

I/Q Mode

Defines the format of the input signal.

For more information on I/Q data processing modes see the R&S

 

FSW I/Q Analyzer

and I/Q Input User Manual.

 

Input and Frontend Settings

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands