manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 347

Reference

R&S

®

FSW-K7

347

User Manual 1173.9240.02 ─ 17

A.2 I/Q Data File Format (iq-tar)

I/Q data is packed in a file with the extension 

.iq.tar

. An iq-tar file contains I/Q data

in binary format together with meta information that describes the nature and the
source of data, e.g. the sample rate. The objective of the iq-tar file format is to separate
I/Q data from the meta information while still having both inside one file. In addition, the
file format allows you to preview the I/Q data in a web browser, and allows you to
include user-specific data.

The iq-tar container packs several files into a single 

.tar

 archive file. Files in 

.tar

format can be unpacked using standard archive tools (see 

http://en.wikipedia.org/wiki/

Comparison_of_file_archivers

) available for most operating systems. The advantage

of 

.tar

 files is that the archived files inside the 

.tar

 file are not changed (not com-

pressed) and thus it is possible to read the I/Q data directly within the archive without
the need to unpack (untar) the 

.tar

 file first.

Sample iq-tar files

If you have the optional R&S

 

FSW VSA application (R&S

 

FSW-K70), some sample iq-

tar files are provided in the 

C:/R_S/Instr/user/vsa/DemoSignals

 directory on

the R&S

 

FSW.

Contained files

An iq-tar file must contain the following files:

●

I/Q parameter XML file

, e.g. 

xyz.xml

Contains meta information about the I/Q data (e.g. sample rate). The filename can
be defined freely, but there must be only one single I/Q parameter XML file inside
an iq-tar file.

●

I/Q data binary file

, e.g. 

xyz.complex.float32

Contains the binary I/Q data of all channels. There must be only one single I/Q
data binary file inside an iq-tar file.

Optionally, an iq-tar file can contain the following file:

●

I/Q preview XSLT file

, e.g. 

open_IqTar_xml_file_in_web_browser.xslt

Contains a stylesheet to display the I/Q parameter XML file and a preview of the
I/Q data in a web browser.
A sample stylesheet is available at 

http://www.rohde-schwarz.com/file/

open_IqTar_xml_file_in_web_browser.xslt

.

 

I/Q Data File Format (iq-tar)

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands