manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 25

Measurements and Result Displays

R&S

®

FSW-K7

25

User Manual 1173.9240.02 ─ 17

Marker Peak List

The marker peak list determines the frequencies and levels of peaks in the spectrum or
time domain. How many peaks are displayed can be defined, as well as the sort order.
In addition, the detected peaks can be indicated in the diagram. The peak list can also
be exported to a file for analysis in an external application.

You can define search and sort criteria to influence the results of the analysis (see

chapter 6.4.1, "Marker Search Settings"

, 

on page 139).

Remote command: 

LAY:ADD? '1',RIGH, PEAK

, see 

LAYout:

​

ADD[:

​

WINDow]?

​

 

on page 284

Results:

CALCulate<n>:

​

MARKer<m>:

​

X

​

 

on page 301

CALCulate<n>:

​

MARKer<m>:

​

Y?

​

 

on page 302

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands