manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 340

Remote Commands for Analog Demodulation Measurements

R&S

®

FSW-K7

340

User Manual 1173.9240.02 ─ 17

Parameters:

<Offset>

This parameter defines the time offset between the capture buf-
fer start and the start of the extracted application data. The off-
set must be a positive value, as the application can only analyze
data that is contained in the capture buffer.
Range: 

- [pretrigger time]  to  min (posttrigger time; sweep
time)

*RST: 

0

Manual operation:

See 

"Capture Offset"

 

on page 103

11.9 Importing and Exporting I/Q Data and Results

The I/Q data to be evaluated in the Analog Demodulation application can not only be
measured by the Analog Demodulation application itself, it can also be imported to the
application, provided it has the correct format. Furthermore, the evaluated I/Q data
from the Analog Demodulation application can be exported for further analysis in exter-
nal applications.

For details on importing and exporting I/Q data see 

chapter 7, "I/Q Data Import and

Export"

, 

on page 156.

MMEMory:LOAD:IQ:STATe

............................................................................................ 340

MMEMory:STORe:IQ:COMMent

......................................................................................340

MMEMory:STORe:IQ:STATe

.......................................................................................... 341

MMEMory:LOAD:IQ:STATe 

1,<FileName>

This command restores I/Q data from a file.

Parameters:

<FileName>

String containing the path and name of the source file.

Example: 

Loads IQ data from the specified file.

Usage: 

Setting only

Manual operation:

See 

"I/Q Import"

 

on page 157

MMEMory:STORe:IQ:COMMent 

<Comment>

This command adds a comment to a file that contains I/Q data.

Parameters:

<Comment>

String containing the comment.

Example: 

MMEM:STOR:IQ:COMM 'Device test 1b'

Creates a description for the export file.

MMEM:STOR:IQ:STAT 1, 'C:
\R_S\Instr\user\data.iq.tar'

Stores I/Q data and the comment to the specified file.

 

Importing and Exporting I/Q Data and Results

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands