manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 154

Analysis

R&S

®

FSW-K7

154

User Manual 1173.9240.02 ─ 17

In multiple zoom mode, you can enlarge several different areas of the trace simultane-
ously. An overview window indicates the zoom areas in the original trace, while the
zoomed trace areas are displayed in individual windows. The zoom area that corre-
sponds to the individual zoom display is indicated in the lower right corner, between
the scrollbars.

Remote command: 

DISPlay[:

​

WINDow<n>]:

​

ZOOM:

​

MULTiple<zoom>:

​

STATe

​

 

on page 336

DISPlay[:

​

WINDow<n>]:

​

ZOOM:

​

MULTiple<zoom>:

​

AREA

​

 

on page 335

Restore Original Display

Restores the original display and closes all zoom windows.

Remote command: 

DISPlay[:

​

WINDow<n>]:

​

ZOOM:

​

STATe

​

 

on page 335 (single zoom)

DISPlay[:

​

WINDow<n>]:

​

ZOOM:

​

MULTiple<zoom>:

​

STATe

​

 

on page 336 (for each

multiple zoom window)

Deactivating Zoom (Selection mode)

Deactivates zoom mode.

Tapping the screen no longer invokes a zoom, but selects an object.

Remote command: 

DISPlay[:

​

WINDow<n>]:

​

ZOOM:

​

STATe

​

 

on page 335 (single zoom)

DISPlay[:

​

WINDow<n>]:

​

ZOOM:

​

MULTiple<zoom>:

​

STATe

​

 

on page 336 (for each

multiple zoom window)

6.9 Analysis in MSRA/MSRT Mode

The data that was captured by the MSRA/MSRT Master can be analyzed in the Analog
Demodulation application.

The analysis settings and functions available in MSRA/MSRT mode are those descri-
bed for common Signal and Spectrum Analyzer mode.

Analysis line settings

In addition, an analysis line can be positioned. The analysis line is a common time
marker for all MSRA/MSRT applications.

To hide or show and position the analysis line, a dialog box is available. To display the
"Analysis Line" dialog box, tap the "AL" icon in the toolbar (only available in MSRA/
MSRT mode). The current position of the analysis line is indicated on the icon.

 

Analysis in MSRA/MSRT Mode

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands