manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 192

Remote Commands for Analog Demodulation Measurements

R&S

®

FSW-K7

192

User Manual 1173.9240.02 ─ 17

Parameters:

<Band>

K | A | KA | Q | U | V | E | W | F | D | G | Y | J | USER
Standard waveguide band or user-defined band.

Note:

 The band formerly referred to as "A" is now named "KA";

the input parameter "A" is still available and refers to the same
band as "KA".
For a definition of the frequency range for the pre-defined bands,
see 

table 11-2

).

*RST: 

F (90 GHz - 140 GHz)

Example: 

CORR:CVL:SEL 'LOSS_TAB_4'

Selects the conversion loss table.

CORR:CVL:BAND KA

Sets the band to KA (26.5 GHz - 40 GHz).

Manual operation:

See 

"Band"

 

on page 67

[SENSe:]CORRection:CVL:BIAS 

<BiasSetting>

This command defines the bias setting to be used with the conversion loss table.

Before this command can be performed, the conversion loss table must be selected
(see 

[SENSe:

​

]CORRection:

​

CVL:

​

SELect

​

 

on page 195.

This command is only available with option B21 (External Mixer) installed.

Parameters:

<BiasSetting>

numeric value
*RST: 

0.0 A

Default unit: A

Example: 

CORR:CVL:SEL 'LOSS_TAB_4'

Selects the conversion loss table.

CORR:CVL:BIAS 3A

Manual operation:

See 

"Write to <CVL table name>"

 

on page 64

See 

"Bias"

 

on page 67

[SENSe:]CORRection:CVL:CATAlog?

This command queries all available conversion loss tables saved in the

C:\r_s\instr\user\cvl\

 directory on the instrument.

This command is only available with option B21 (External Mixer) installed.

Usage: 

Query only

[SENSe:]CORRection:CVL:CLEAr

This command deletes the selected conversion loss table. Before this command can
be performed, the conversion loss table must be selected (see 

[SENSe:

​

]CORRection:

​

CVL:

​

SELect

​

 

on page 195).

Configuring the Measurement

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands